Laboratory water quality standards:
The small laboratory pure water machine designed and produced by our company completely conforms to the water specification of
analytical laboratory of the People's Republic of China GB 6682-1992.The conductivity of the corresponding water quality was 0.1us /cm,
1uS/cm and 5uS/cm, respectively.
Primary water is used for demanding analytical tests, including tests that require particles, such as high pressure liquid chromatography...
Secondary water is used for tests such as inorganic trace analysis, such as atomic absorption spectrometry...
Tertiary water is used forgeneral chemical analysis tests, such as titration analysis, cleaning beakers, volumetric bottles, reaction vessels...
Full automatic water, ready to use.The storage tank will shut down automatically when it is full of water, the equipment will be in
standby state, and the storage tank will run automatically when it is short of water.
One machine for both.The output of pure water and ultra-pure water, and the on-line resistance value meter detection, easy to use.
|
|
|
|
☆Tap water--- PP coarse filter--- activated carbon filter--- PP fine filters--- booster pump--- reverse osmosis devices --- level mixed ion
exchangecolumn--- the secondary mixed ion exchange column--- water tap
☆Tap water---PP coarse filter--- activated carbon filter--- PP fine filters--- booster pump--- reverse osmosis devices ---the middle water
tank, water pump--- uv sterilizer--- EDI device--- pure water--- pure water pump--- water faucet of the latest technology
Type no. | Water rate(L/H) | Produced water quality | Pressure of work(MPa) | Material is qualitative | Way to work |
BSWLAB-20-5
|
≥20 | 5uS/cm | ≤0.6 | Stainless steel/carbon steel sprayed | Fully automatic |
BSWLAB-20-1
|
≥20 | 1uS/cm | ≤0.6 | Stainless steel/carbon steel sprayed | Fully automatic |
BSWLAB-20-10
|
≥20 | 10MΩ.cm | ≤0.6 | Stainless steel/carbon steel sprayed | Fully automatic |
BSWLAB-20-15
|
≥20 |
15MΩ.cm
|
≤0.6 | Stainless steel/carbon steel sprayed | Fully automatic |
BSWLAB-40-5
|
≥40 | 5uS/cm | ≤0.6 | Stainless steel/carbon steel sprayed | Fully automatic |
BSWLAB-40-1
|
≥40 | 1uS/cm | ≤0.6 | Stainless steel/carbon steel sprayed | Fully automatic |
BSWLAB-40-10
|
≥40 | 10MΩ.cm | ≤0.6 | Stainless steel/carbon steel sprayed | Fully automatic |
BSWLAB-40-15
|
≥40 |
15MΩ.cm
|
≤0.6 | Stainless steel/carbon steel sprayed | Fully automatic |
BSWLAB-80-5
|
≥80 | 5uS/cm | ≤0.6 | Stainless steel/carbon steel sprayed | Fully automatic |
BSWLAB-80-1
|
≥80 | 1uS/cm | ≤0.6 | Stainless steel/carbon steel sprayed | Fully automatic |
BSWLAB-80-10
|
≥80 | 10MΩ.cm | ≤0.6 | Stainless steel/carbon steel sprayed | Fully automatic |
BSWLAB-80-15
|
≥80 |
15MΩ.cm
|
≤0.6 | Stainless steel/carbon steel sprayed | Fully automatic |
BSWLAB-120-5
|
≥120 | 5uS/cm | ≤0.6 | Stainless steel/carbon steel sprayed | Fully automatic |
BSWLAB-120-1
|
≥120 | 1uS/cm | ≤0.6 | Stainless steel/carbon steel sprayed | Fully automatic |
BSWLAB-120-10
|
≥120 | 10MΩ.cm | ≤0.6 | Stainless steel/carbon steel sprayed | Fully automatic |
BSWLAB-120-15
|
≥120 |
15MΩ.cm
|
≤0.6 | Stainless steel/carbon steel sprayed | Fully automatic |
Note: 1. The products of the company can be customized according to the requirements of customers. If customers have any questions
or requirements about the products, please call us for consultation.
2. The company reserves the right to make any modification at any time, and we reserve the right to make any modification without
prior notice.